air speed

英 [eə(r) spiːd] 美 [er spiːd]

n.  空速

机械



双语例句

  1. There will be a relation between the air speed and the amount of twist of the wire necessary to hold the plate in normal presentation to the current.
    在这种情况下,气流速度与扭丝为使摆动片同气流保持位置关系所要产生的扭转量之间存在某种关系。
  2. An accident report blamed faulty air speed sensors and pilot error for the crash that killed 228 people.
    事故调查报告认为,飞行速度传感器和飞行员操作失误共同导致了这次造成228人死亡的空难。
  3. Investigators ultimately determined that the Air France flight went down after the pilots reacted improperly after ice crystals blocked air speed sensors. They ultimately stalled the plane, causing the crash.
    调查者最终断定,法航447飞行员在冰晶阻塞空气速度传感器后操作失误,导致飞机速度失控遇难。
  4. Studies the mechanical performance such as minimum start-up air speed, reaction time and ventilation performance of the catcher developed by the authors on the simple opening ventilation test-bed.
    利用搭建的简易开放式通风实验台,实验研究了所研制的一种具有自动捕风功能的通风装置的最小启动风速、反应时间等机械性能及通风性能。
  5. It is considered that, air speed, air temperature, air relative humidity and air pressure have influence upon unevenness of PET POY.
    讨论了侧吹风的风速、风温、相对湿度及风道压力对涤纶POY条干不匀率的影响。
  6. Experimental result shows that the deposition velocity of the duct increases with the increase of the air speed and the particle size.
    试验结果表明,风管断面的沉降速度随风速和粒径的增大而增大;
  7. The influence rules of absorber structure parameters, exterior excitation and air speed on the increased oil temperature are also analyzed.
    编程分析了筒式减振器缸体结构参数、外界激励以及空气流速对其油液温升的影响规律。
  8. These are valuable reference in selecting and researching the air speed measuring techniques.
    这对风速测量技术的选择和研究具有一定的参考价值。
  9. This guy has a little bit of problem. he's screwing, not real steady* He's having a hard time maintaining serious air speed. he's got flaps down a little bit.
    这家伙遇到些麻烦了。他在摇晃,并不很稳。他很难控制住重要的空速。他放下一点襟翼。
  10. The influence of the interactions between air temperature and thickness and between air speed and thickness was extreme striking;
    风温与片厚和风速与片厚的交互作用对魔芋甘露聚糖具有极其显著的影响;
  11. The variation rule of the vertical sintering speed with proceeding of sintering was investigated through the research of the air speed.
    通过研究气流速度的变化研究了垂直烧结速度随烧结过程而变化的规律。
  12. Through changing the air speed of flow in the software control panel, the difference of the combustion temperature and each kind of gas mass concentration distribution under the different excess air coefficient was obtained.
    通过在软件控制面板改变空气流速,得出了不同过剩空气系数下燃烧温度及各种气体质量浓度分布的差异;
  13. At the same time, we analyses the effect of the air speed on the property of silencer on real condition and modify the wave equation and the boundary condition.
    同时,根据实际情况分析了气流对消声器特性的影响,对波动方程及其边界条件进行了修正。
  14. The relation of air speed and specific molding pressure;
    还分析了气流速度与压实比压的关系;
  15. The paper introduces the research methods and experimental designs for studying the air temperature field and air speed field in front of wildfire head at various ambient air speeds and different slope angles.
    该文介绍了野外火火头前方气流速度场和温度场在不同火强度、坡度和环境风速条件下的规律的研究方法和实验设计。
  16. The influences of adsorption pressure and temperature, air speed, the ratio of adsorbent/ diesel and flow of hydrogen on the desulfurization effect are investigated.
    考察了改变吸附压力、温度、空速、剂油比、氢气流量等条件对吸附脱硫效果的影响。
  17. Dress heat resistance, air temperature and air speed are the three main factors affecting thermal comfort.
    服装热阻、空气温度及气流速度是影响人体热舒适性的三个主要因素。
  18. Experimental platform was set up. Through a lot of experiments, many parameters and valuable results about honeycomb electric field are obtained, such optimum voltage, optimum air speed and so on.
    在实验室搭建了相应的实验平台,对蜂窝电场的各参数进行了详细的测量与研究,得出了最佳电压、最佳气流速度等重要参数。
  19. Based on these situations, the method of the measurement of the primary air speed from the boiler is improved.
    根据这种情况,对锅炉的一次风速监测方法进行了改进。
  20. The results show that the thermo-driving heat transfer effectiveness of the cooling configuration filled with porous medium can be enhanced by increasing the rotating speed, heat flux and cooling air speed.
    实验结果表明:随着旋转速度、热流密度和冷气进口速度的增大,装有多孔介质的新型冷却结构的热驱动换热能力逐渐增强。
  21. On principle of coal powder conveying system, the amount of carried gas and the duct configuration parameters and its optimization were analyzed on emphasis as well as the coal conveying ratio, air speed, air pressure etc.
    在介绍了煤粉输送系统的原理的基础上,重点分析了输送用气量和管道配置参数及其优化;
  22. The results are close to the industrial data. The influence of reaction temperature, coolant temperature, reaction pressure and reactor air speed was predicted.
    预测了反应温度、冷却介质温度、反应压力和反应空速对加氢反应结果的影响。
  23. Steam pipeline insulation has been experimented with the model and computer data simulation. The material, thickness and structure of the insulating layer, surface blackness of the insulating structure together with the influence of environmental temperature and air speed on the insulation effect have been analyzed.
    以实体模型和计算机数值模拟对蒸汽管道保温状况进行实验,分析保温层的材料、厚度、结构,保温结构外表面黑度,环境温度和环境风速对保温效果的影响。
  24. With an increase in air speed there will be an increase in escaped quantity of water droplets.
    随空气速度增大水滴逃逸量增大。
  25. This paper presents a mathematical model for describing the variations of the condenser temperature and pressure with the exhaust steam heat load, frontal air speed and the inlet air temperature of an air-cooled condenser based on a theoretical analysis.
    通过理论分析,建立了空冷凝汽器温度和压力随汽轮机排汽热负荷、凝汽器迎风面风速以及进口空气温度变化的理论模型。
  26. The effects of temperature and air speed were investigated on the selective oxidation of n-pentane to phthalic and maleic anhydrides using the VPO-U catalyst.
    研究了VPO-U型催化剂用于正戊烷选择性氧化制备苯酐和顺酐的催化性能,考察了反应温度和空速对反应过程的影响。
  27. High-speed train air-conditioning air supply mode, air speed, air temperature affects airflow distribution and comfort.
    高速列车空调的送风方式、送风速度、送风温度等影响着车内的气流组织和舒适性。
  28. The use of heat compressed air could get higher air speed and improve the productivity of jet mill.
    利用热的压缩空气可以产生更大的气流速度,提高气流粉碎的生产能力,同时高温气体,还能够有效的影响物料的粉碎效果和特性。
  29. A two-dimensional model and 3D models of the concentration of pollutants with different ventilation and indoor air speed distribution were simulated by CFD technology.
    本文应用CFD数值模拟技术,分别采用二维模型、三维模型对不同排风方式和送风速度下室内污染物的浓度分布进行了数值模拟。